3-pcs maintenance unit, BG 30, G⅜, 7–145 psi, drain valve, gauge
Product information "3-pcs maintenance unit, BG 30, G⅜, 7–145 psi, drain valve, gauge"
3-pieces maintenance unit consisting of filter pressure regulator and compressed air lubricator – connected via double nipple. The variations of the individual units are available as custom-made. Mounting set is available as accessory. The pressure gauge is added loosely.
| Condensate drain: | Manual drain valve |
|---|---|
| Device designation: | Three-piece maintenance unit |
| Direction of flow: | in arrow direction |
| Filter element (filter porosity): | 40 µm |
| Max. operating pressure (p1) [bar]: | max. 16 bar |
| Max. secondary pressure (p2) [bar]: | max. 10 bar |
| Medium (gas type): | compressed air |
| Min. flow rate: | 47 Nl/min (oil supply 10 drops / min at 6 bar) |
| Model series: | standard |
| Mounting position: | vertically |
| Nominal pressure (housing): | PN 25 |
| Nominal width: | DN 6 |
| Operating temperature [°C]: | 0 °C bis +50 °C |
| Pre-pressure dependence [%]: | < 3 % |
| Pressure adjustment: | Toggle screw |
| Pressure gauge: | Pressure gauge Ø 50 (horizontally) |
| Pressure gauge display area: | 0–16 bar |
| Rates of flow [l/min]: | 544 l/min (p₁ = 8 bar, p₂ = 6 bar, Δp = 1 bar) |
| Reverse control hysteresis [bar]: | ~ 1 bar |
| Reversible: | reversible |
| Section: | Compressed air preparation |
| Usable bowl capacity (Condensate volumen): | 25 ml |
| Usable bowl capacity compressed air lubricators: | 40 ml |
| control range (p2) [bar]: | 0,5–10 bar |
Ersatzteile und Zubehör
Double nipple, G⅜ male × G⅜ male, L: 37 mm, AF: 17 mm, long, cone 45°, PU of 5 pieces
€2.95*
Thread 2:
G ⅜
Variants from €1.84*