Microfilter, in-/outlet: G1, reduced, BG 90-1, manual drain valve, 4.8 kg
Product information "Microfilter, in-/outlet: G1, reduced, BG 90-1, manual drain valve, 4.8 kg"
Microfilters m. Borosilicate filter. Preferably filtering aerosols and solid impurities bigger than 0.01 μm. The use of a Microfilter (v) is recommended. Application: paint spraying systems, sand blasting systems, control systems, vacuum systems, measuring instruments, fluidics, transport air, process air, air bearings, air conditioning technology. Structure: 1. stretched stainless steel support shell for inner support. 2. pre-filtration fleece. 3. binder-free borosilicate microfibre fleece 0.01 μm. 4. supporting fabric. 5. stretched stainless steel shell for outer support. 6. foam sheathing. 7. aluminium end caps. Mode of operation: The, preferably, pre-cleaned air (Microfilter) passes through the filter element from the inside to the outside. At first larger impurities are retained by the prefiltration fleece before the three-dimensional filter effect takes place in the multi-layered borosilicate. Because of the large hollow volume of 94 % between the glass fibres, a high absorption quantity of solid components is guaranteed. The separated liquid coalesces in droplets and is collected in the foam. This liquid then drips into the bowl and can be discharged to the outside. Cleaning: is not possible. Replacement is recommended at approx. 0.6 bar pressure drop (red area on differential pressure gauge) or after approx. 2,000 operating hours.
| Compressed air quality: | acc. to ISO 8573-1, dust / oil, class 1 |
|---|---|
| Condensate drain: | with manual drain valve |
| Device designation: | Microfilter m |
| Direction of flow: | in arrow direction (from inside to outside) |
| Efficiency: | 99,9999 % in relation to 0,01 µm |
| Filter element (m): | 430-8 |
| Max. operating pressure (p1) [bar]: | max. 16 bar |
| Min. operating pressure (p1) [bar]: | from 0 bar |
| Model series: | vma |
| Mounting position: | vertically |
| Operating temperature [°C]: | +1,5 °C up to +65 °C |
| Rates of flow [l/min]: | 4,436 l/min (p₁ = 6 bar, Δp = 0.1 bar) |
| Residual oil content: | 0,01 ppm |
| Section: | Compressed air preparation |