Activated carbon filter, in-/outlet: G¾, reduced, BG 90-1, manual drain valve, 4.59 kg
Product information "Activated carbon filter, in-/outlet: G¾, reduced, BG 90-1, manual drain valve, 4.59 kg"
Activated carbon filters a. Activated carbon filters to adsorb vaporous liquids. The use of a microfilter (m) is strongly recommended if no dried air is used. Application: food industry, packaging industry, beverage industry, breathing air, pressure chambers, medical technology, dental technology, measuring technology. Structure: 1. finely grinded activated carbon. 2. filtration layer made of binder-free microfibre fleece. 3. stretched stainless steel support shell to increase the free adsorption area. 4. aluminium end caps. Mode of operation: the pre-cleaned compressed air (dryer, microfilter or microfilter with pre-filter) passes through the activated carbon layer. The density of the activated carbon layer ensures a sufficient contact time for the adsorption of vaporous liquids. Activated carbon particles are retained in the outer filter layer. To achieve a long service life, compressed air should not contain any liquid or solid impurities when entering the activated carbon filter. Cleaning: is not possible. Replacement is recommended after approx. 2,000 operating hours.
Compressed air quality: | acc. to ISO 8573-1, class 1 |
---|---|
Condensate drain: | with manual drain valve |
Device designation: | Activated carbon filters a |
Direction of flow: | in arrow direction (from inside to outside) |
Filter element (a): | 431-8 |
Max. operating pressure (p1) [bar]: | max. 16 bar |
Model series: | vma |
Mounting position: | vertically |
Operating temperature [°C]: | +1,5 °C up to +45 °C |
Pressure gauge: | without differential pressure gauge |
Rates of flow [l/min]: | 1,631 l/min (p₁ = 6 bar, Δp = 0.12 bar) |
Residual oil content: | 0,005 ppm |
Section: | Compressed air preparation |