Savety valve component tested, F/K/S, G2, DN 48, L: 215 mm, seal: FKM, set pressure 2.0–6 bar
Image similar
Product information "Savety valve component tested, F/K/S, G2, DN 48, L: 215 mm, seal: FKM, set pressure 2.0–6 bar"
Component-tested high-performance safety valves G1–G2. Safety valves F / K / S. This valves have a protective cover (stainless steel) and the spring area of the medium is separately. This design allows a usage to secure fixed pressure and vehicle tanks from dust and granular goods. The valves can only be supplied with a preset pressure, the desired set pressure must be specified with the order. After setting, the valves are labeled and sealed. For functional testing, the safety valve can be opened by turning the knurled screw. The bearing surfaces and seals can be cleaned from impurities by unscrewing the upper part without changing the pressure setting. Repairs may only be executed by the manufacturer. Options: Stainless steel - and NBR or PTFE seals on request!
| Adjustment range: | 0.2 up to 6 bar |
|---|---|
| Closing pressure difference: | < 10 % |
| Connection: | G 2 |
| Device designation: | Safety valve F/K/S |
| Length L: | 282 |
| Material housing, top section, inner parts: | brass (stainless steel on request) |
| Material pressure spring, protective cover: | stainless steel |
| Material seals: | FKM (Viton) (NBR or PTFE on request) |
| Max. tightening torque (valve installation): | 80 Nm |
| Model series: | Safety valves |
| Mounting position: | vertically, upright |
| Nominal width: | 48 |
| Opening pressure difference: | < 10 % |
| Operating temperature [°C]: | -10 °C up to +200 °C |
| Section: | Compressed air accessories |
| Set pressure (bar): | 0.2 – 6 |
| Width across flats AF [mm]: | 80 |
| thread length: | 26 |