Microfilter standard, BG 40, G½, plastic bowl, manual drain valve
Product information "Microfilter standard, BG 40, G½, plastic bowl, manual drain valve"
Microfilters are suitable for all applications that require a particularly high purity of compressed air. Installed behind the compressed air filter, they remove 99.9999% of the smallest remaining particles (water, oil or dirt) almost completely (based on 0.01 μm). Residual oil content 0.01 ppm. The filter insert has to be replaced after approx. six months. An additional option with metal protection basket or metal bowl is available. Connection thread from G⅛ to G⅜. Please notice: For a longer downtime, a compressed air filter of 580 psi should be installed in front of it.
| Device designation: | Microfilter |
|---|---|
| Direction of flow: | in arrow direction |
| Filter element (filter porosity): | 0.01 µm |
| Max. operating pressure (p1) [bar]: | max. 16 bar |
| Min. operating pressure (p1) [bar]: | from 0 bar |
| Model series: | standard |
| Mounting position: | vertically |
| Nominal pressure (housing): | PN 25 |
| Nominal width: | DN 15 |
| Operating temperature [°C]: | 0 °C bis +50 °C |
| Rates of flow [l/min]: | 2,175 l/min (p₁ = 6 bar, Δp = 0,2 bar) |
| Section: | Compressed air preparation |
| Usable bowl capacity (Condensate volumen): | max. until microfilter insert |
Ersatzteile und Zubehör
