Oxy fuel single cutting torch, 10–75 mm, nozzle, accessories, L: 500 mm, head 90°, hose: O₂: G¼ × DN 6; C₂H₂: G⅜ LH × DN 9
Image similar
Product information "Oxy fuel single cutting torch, 10–75 mm, nozzle, accessories, L: 500 mm, head 90°, hose: O₂: G¼ × DN 6; C₂H₂: G⅜ LH × DN 9"
Oxy fuel operated single cutting torches are suited for all cutting operations up to 300 mm max.. In case of a re-ignition the mixing nozzles ensure, that no oxygen-fuel gas mix re-ignites through the bore hole into the burner. The cutting oxygen is lever operated. The nozzle head is available in two slanted designs. A guide roller and a circle point end are part of the scope of supply. Standard hoses – oxygen G¼ × DN 6; acetylene G⅜ LH × DN 9.
Device designation: | Single cutting torch with gas mixing nozzle (propane/air) |
---|---|
Length (mm): | 500 |
Model series: | Autogenous technology |
Section: | Welding |
Ersatzteile und Zubehör
Hose fitting, detachable, connection thread: G¼, hose width: DN 6, hose nozzle with ball plug
€4.46*
Connection thread:
G ¼
|
Hose width:
DN 6
Variants from €3.73*
Hose fitting, detachable, connection thread: G⅜ LH, hose width: DN 9, hose nozzle with ball plug
€3.73*
Connection thread:
G ⅜ LH
|
Hose width:
DN 9
Mixing cutting nozzle, standard, 3–6 mm, A-O, pressure/consumption: O₂: 2.5–3.5 bar/800 l/h, C₂H₂: 0.35 bar/400 l/h
€25.63*
Cutting area (mm):
3 – 6
Mixing cutting nozzle, standard, 5–12 mm, A-O, pressure/consumption: O₂: 3–4 bar/1,900 l/h, C₂H₂: 0.35 bar/470 l/h
€25.63*
Cutting area (mm):
5 – 12
Mixing cutting nozzle, standard, 10–75 mm, A-O, pressure/consumption: O₂: 4–5 bar/4,000 l/h, C₂H₂: 0.4 bar/510 l/h
€25.63*
Cutting area (mm):
10 – 75
Mixing cutting nozzle, standard, 70–100 mm, A-O, pressure/consumption: O₂: 4.5–5.5 bar/6,800 l/h, C₂H₂: 0.4 bar/790 l/h
€25.63*
Cutting area (mm):
70 – 100
Mixing cutting nozzle, standard, 90–150 mm, A-O, pressure/consumption: O₂: 4.5–5.5 bar/7,900 l/h, C₂H₂: 0.4 bar/830 l/h
€25.63*
Cutting area (mm):
90 – 150
Mixing cutting nozzle, standard, 140–200mm, A-O, pressure/consumption: O₂: 5–6 bar/9,400 l/h, C₂H₂: 0.4 bar/850 l/h
€25.63*
Cutting area (mm):
140 – 200
Mixing cutting nozzle, standard, 190–300 mm, A-O, pressure/consumption: O₂: 6–6.5 bar/14,800 l/h, C₂H₂: 0.45 bar/1,250 l/h
€25.63*
Cutting area (mm):
190 – 300
Mixing cutting nozzle, high heating power, 70–100 mm, A-O, P/consumption: O₂: 6.5–7.5 bar/21,500 l/h, C₂H₂: 0.45 bar/1,420 l/h
€40.62*
Cutting area (mm):
70 – 100
Variants from €25.63*